Overview

KTPT input liquid level transmitter is based on the principle that the measured static pressure of the liquid is proportional to the height of the liquid, and uses the piezoresistive effect of diffused silicon to convert the static pressure into an electrical signal. Temperature compensated and linear corrected. Converts 4-20mADC into standard current signal output. The sensor part of the input level transmitter can be directly put into the liquid, and the transmitter part can be fixed with flange or bracket, which is very convenient to install and use.

Features

1. Good stability and high precision;

2. The input level transmitter is directly put into the measured medium, which is quite convenient to install and use;

3. Solid structure, no moving parts, high reliability, long service life, from water, oil to high viscosity paste can be measured with high precision, not affected by the measured medium foaming, deposition, electrical characteristics of a wide range of temperature compensation. The input type liquid level transmitter has power reverse polarity protection and overload current limit protection.

Performance parameters

Measuring range: 0.3-50m

Accuracy: 0.2%, 0.5%

Working temperature:-20-80 ℃

Output signal: two-wire 4-20mADC

Power supply voltage: standard 24VDC(12-36VDC)

Insensitive area: ≤?.0% FS

Load capacity: 0-600Ω

Relative temperature:<85%

Selection

Factory display

Honor Show

Exhibition style