KTPT Level Transmitter
This smart submersible level transmitter features a high-precision diffused silicon sensing element and can be directly immersed in liquid media to measure the liquid level height. It incorporates temperature compensation functionality, boasts strong anti-interference performance, and outputs a standard 4-20mA/HART signal with real-time readings displayed on an LED screen. It is suitable for use with non-corrosive liquids and is easy to install.
Key words:
Classification:
Telephone:
E-mail:
KTPT Level Transmitter
Overview
The KTPT submersible level transmitter operates on the principle that the hydrostatic pressure of a liquid is directly proportional to its liquid height. It utilizes the piezoresistive effect of diffused silicon to convert hydrostatic pressure into an electrical signal, which then undergoes temperature compensation and linear correction before being converted into a standard 4-20 mA DC current signal output. The sensor portion of the submersible level transmitter can be directly immersed in the liquid, while the transmitter unit itself can be securely mounted using a flange or bracket, making installation and use extremely convenient.
Features
1. Good stability and high precision;
2. The submersible level transmitter is directly immersed into the medium being measured, making installation and use highly convenient.
3. Solid-state design with no moving parts, offering high reliability and a long service life. It enables highly accurate measurements across a wide range of media—from water and oil to highly viscous pastes—and is unaffected by foaming, sedimentation, or the electrical properties of the measured medium. It also features broad-range temperature compensation. The submersible level transmitter is equipped with reverse-polarity protection for the power supply and overcurrent limiting protection against overload.
Performance parameters
Measurement range: 0.3–50 m
Accuracy: 0.2%, 0.5%
Operating temperature: -20–80℃
Output signal: Two-wire 4-20mA DC
Power supply voltage: Standard 24VDC (12-36VDC)
Non-responsive zone: ≤ ?%.0%FS
Load capacity: 0–600Ω
Relative humidity: <85%
Selection
Model |
Instructions |
||||||||
KTPT |
Liquid level transmitter |
||||||||
Isomorphism |
1 |
|
Cable-type | ||||||
2 |
|
Rod-type (sensor mounted at the bottom, directly contacting the liquid medium) | |||||||
3 |
|
Anti-corrosion | |||||||
4 |
|
Pilot-operated (sensor mounted on the upper part, does not directly contact the medium) | |||||||
Process connection form |
T |
|
Bracket installation | ||||||
N |
|
Flange installation DN40 PN1.0 | |||||||
Y |
|
Special Agreement | |||||||
Sensor connection material |
1 |
|
304 | Rod-type | |||||
2 |
|
316 | |||||||
3 |
|
316L | |||||||
4 |
|
Nitrile rubber and polyvinyl chloride (PVC) composite | Cable-type | ||||||
5 |
|
Polytetrafluoroethylene (F4) (polypropylene flange) | |||||||
Explosion-proof method |
0 |
|
Not explosion-proof | ||||||
And E |
|
Intrinsically safe ExialICT6 | |||||||
Display method |
0 |
|
Without on-site instructions | ||||||
K |
|
With digital display header | |||||||
|
-mouth |
|
Measurement height (mm) | ||||||
Factory display
Plant display 7
Plant display 8
Plant display 6
Plant display 5
Plant Display 4
Plant Display 9
Plant Exhibition 3
Plant display 2
Factory display
Honor Show
Exhibition style
Previous Page
Next Page
Previous Page
KTPT-C Level Transmitter
Next Page
Related Products
Product Consulting
We will contact you within one working day. Please pay attention to your email.